User's Manual

(6) Select AM/PM using *(←) and #(→) Key and then press ENTER.
(7) The screen moves to Menu Options screen.
3) RANGE TEST
(1) Go to 3.RANGE TEST using *(←) and #(→) Key and then press ENTER.
(2) "RANGE TEST" is displayed
(3) Press ENTER and the range test begins.
(4) If you press CANCEL, range test is finished and the screen moves to Menu Options screen.
※ To return to Menu Options on the process, input CANCEL.
4) PRE-SET MESSAGE
(1) Go to 4.PRE-SET MESSAGE using *(←) and #(→) Key and then press ENTER.
(2) Select ON/OFF using *(←) and #(→) Key. # To set the Pre-Set Default Message.
(3) "PRE-SET DEFAULT MESSAGE(1-4):" is displayed and you can input among 1-4.
(4) After input preset default message then press ENTER
(5) The screen returns to Menu Options screen.
※ To return to Menu Options on the process, input CANCEL.
5) SET PAGER ALERT
(1) Go to 5.SET PAGER ALERT using *(←) and #(→) Key and then press ENTER.
(2) Select one among "Select Alert Type" list using *(←) and #(→) Key, and then press ENTER.
* Pager Alert Type LIST
1.Vibe Only (9292)
2.Vibe & Flash (9696)
4.Flash & Beep (9595)
3.Flash Only (9797)
5.Flash & Vibe & Beep (9898)
6. Beep Only (8989)
7.Beep & Vibe (8787)
(3) "Are All Pagers Returned??" is displayed and then press ENTER.
(4) "Unplug All Coasters" is displayed and then press ENTER.
(5) "Message Sent Plug In Pager" is displayed and transmit message twice and then move to
Menu Options.
※ To return to Menu Options on the process, input CANCEL.
Alpha Paging System User Manual
6) MODE SELECT