User's Manual

The third Streaming Message also lasts 1 minute and then it returns to first Streaming
Message. This process cycles by terms of 1 minute.
(9) And then ENTER.
(10) The interval of Streaming Message is saved and it moves to Menu Options.
※WARNING! When the Streaming MSG is turned "ON", a streaming MSG has to be entered.
Other wise, a streaming MSG has
not to be entered, if the Streaming MSG is turned
"OFF"
17) SET RECEIVER
(1) Go to 17.STREAMING MSG using *(←) and #(→) Key and then press ENTER.
(2) Then, nine digits bar will be displayed as below.
① Base ID : Any number from 0 to 200 can be selected.
② Group ID : Add a number from 0 to 1249
③ BPS : Either 512 or 1200 BPS can be selected. (Press #0 to select 512, or Press #1 to
select 1200 BPS)
④ Repeater Type (A or B) Setting : If you push #1, the setting is completed with the Repeater
Type (A)
Otherwise, If you push #2, the setting is completed with both Repeater Type (A) and
Repeater Type (B)
◎ Repeater Type (A) : the interval time for sending a signal is "3 seconds"
◎ Repeater Type (B) : the interval time for sending a signal is "5 seconds"
※ Please refer to the repeater transmitter instructional manual for the explanation of detail
functions.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER S AUTHORITY
TO OPERATE THE EQUIPMENT.