User's Guide

Warranty
Lee’s Hi-Tech Enterprises Co., Ltd. guarantees that this product meets its published specifications at
the time of shipment from the factory. Under proper installation it should work as expected.
Warranty Period
This equipment is warranted against defects in material and manufacturing for a period of one year
from the date of shipment. During the warranty period, TELECRANE is responsible for necessary
repairs as long as the product can be proved to be defective.
For warranty service or repair this product must be returned to a service facility designated by
TELECRANE. Buyer will pay shipping charges to TELECRANE while TELECRANE will pay return
shipping charges.
Excluded Items
This warranty does not include consumptive parts such as batteries, fuses, buttons, relays. Also this
warranty does not cover damages caused by improper installation, improper or insufficient
maintenance, unauthorized modification, improper operation, ignorance of environmental
specifications, or improper software setting.
Remarks
No other warranty is expressed or implied, except for the above mentioned.◎
The remedies provided herein are the bu◎ yer’s sole and exclusive remedies. TELECRANE shall not
be liable for any direct, indirect, special, incidental or consequential damages.
Attention
1. Never dismantle the equipment by any unauthorized personnel, or equipment may be damaged.
2. This manual is for reference only. Pleases consult your distributor for further assistance.
3. The equipment has been strictly tested for quality before delivery from our plant. However, this
equipment must not be used in dangerous situations or where damage may result.
4. After operation, shut off main power to the crane, power to receiver, and remove transmitter key.
5. Transmitter should be placed in a safe area when not in use to avoid accidental pressing of buttons.
6. The crane should be equipped with main power relay, limit switch and other safety devices.
7. Don’t use equipment during lightening or high electrical interference conditions.
8. Make sure that the batteries are in good condition and power for receiver is correct.
9. Maintenance should only be done while the crane’s main power is off to prevent electrical shock.
10. The contents of this manual may be amended by the manufacturer without notice.
11. The manufacturer may introduce new functions to the equipment as necessary, therefore, the
descriptions may change.
F25 -60 Operating Instructions