User's Manual

Precautions of Operation
Attention
1. Never dismantle the equipment by any unauthorized personnel, or equipment may
be damaged.
2. This manual is for reference only. Pleases consult your distributor for further
assistance.
3. The equipment has been strictly tested for quality before delivery from our plant.
However, this equipment must not be used in dangerous situations or where
damage may result.
4. After operation, shut off main power to the crane, power to receiver, and remove
transmitter key.
5. Transmitter should be placed in a safe area when not in use to avoid accidental
pressing of buttons.
6. The crane should be equipped with main power relay, limit switch and other
safety devices.
7. Don’t use equipment during lightening or high electrical interference conditions.
8. Make sure that the batteries are in good condition and power for receiver is
correct.
9. Maintenance should only be done while the crane’s main power is off to prevent
electrical shock.
10. The contents of this manual may be amended by the manufacturer without notice.
11. The manufacturer may introduce new functions to the equipment as necessary,
therefore, the descriptions may change.
Precautions
1. Operating in an industrial facility is relatively dangerous; therefore, operator must
have taken the adequate trainings in using F25 system.
2. Those who operate the machine should be healthy and have good judgment in
regard to safety.
3. Although the F25 transmitter is so durable and resistant for the fluctuating
temperature, care still need be taken to prevent it from the severe impact or
pressure.
4. If the severe interference occurred the equipment should be stopped at once.
5. Please take the batteries out when the equipment will not be used for a long time.
6. Be sure to know the “Procedures of Emergency “as follows.