Instruction Manual

Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
R 100%
G 100%
B 100%
Color touch slide
WW 50%
CW 50%
WW 100%
CW 0%
WW 0%
CW 100%
Short press to turn on or turn off light.
Long press 1-6s to adjust brightness.
● R13 1 zone RGB remote
Short press to turn on or turn off light.
Long press 1-6s to adjust brightness.
Fast press 2 times to get white color (RGB mixed).
On/Off
Bright touch slide
Color touch slide
● R11 1 zone dimming remote
● R12 1 zone CCT remote
On/Off
On/Off
R11,R12,R13 Ultrathin Touch Slide RF Remote Controller
User Manual Ver 1.1.0
Page 2
LED indicator
LED indicator
LED indicator
Key function
1%
100%
50%