Assembly Instructions

LED20
ASSEMBLY INSTRUCTIONS:
No tools required.
Retain carton for storage.
1. Carefully remove all parts from the carton. Your
Garden Pixel Lights should include the following (Fig 1):
• 15 pcs staked Garden Pixel Lights
• 1 control box with speaker
• 1 remote control
1. Leave assembled if storage room permits or disassemble,
placing all components in the original carton.
2. Store in cool, dry location away from sunlight.
DISASSEMBLY & STORAGE
2. Remove the protective caps (Fig 2a & 2b).
3. In your desired location; begin to position your
15 pc staked Garden Pixel Lights; spacing
accordingly to your prefered placement &
design. Grasp each staked Garden Pixel Light
near the lowest point possible and push
downward into the ground (Fig 3a).
NOTE: Each Garden Pixel Light has 36” of
spacing wire.
4. Now place your control box with speaker in a
position in order to direct the sound to your
desired location.
Position and push downward into the ground
(Fig 3b).
5. To illuminate; insert the plug into a working GFCI
outlet or an outdoor rated extension cord.
Made in China
Printed in China
This is not a toy, for decorative use only.
Please follow the instructions below in
order to properly assemble and store
your Garden Pixel Lights.
GARDEN PIXEL LIGHTS
Fig 1
Remote Control
Control box
with Speaker
15 pcs staked
Garden Pixel
set
Fig 2a
Fig 2b
Fig 3a
Fig 3b
6. You have completed the installation of the
Garden Pixel Lights set (Fig 4).
Fig 4
REMOTE CONTROL OPERATION
Your 15 Garden Pixel Light’s 131 Function capability
is controlled solely by the use of the remote
control provided (Fig 5).
A CR2025 Battery is included within the remote
control. Before operating the remote; remove
the thin plastic film that has been inserted - by
slightly pulling downward away from the lower
portion of the remote control.
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
1. Red
2. Green
3. Blue
4. Purple
5. Yellow
6. Teal
7. Warm White
8. Multi 3 Color
9. Multi 7 Color
10. Multi 15 Color
Total no. of functions
Steady Wipe
Out
Wipe
In
Tornado Funnel Tornado
Too
Funnel
Too
Chasing
10 10 10 10 10 10 10 10 10 10 10
Chasing
Too
Shooting
Star
Shooting
Star Too
10 10 1
Fade In/
Out
Jump
Flash
RainbowColor / Function
131 LIGHTING COMBINATIONS:
Funnel
Wipe
out
Light
Count
Tornado
Rainbow
Tornado
Too
Steady
Wipe
in
Chasing
Chasing
Too
Funnel
Too
Shooting
Star
Fade
In/Out
Jump
Flash
Shooting
Star Too
GARDEN PIXEL
lue
Tooth
Fig 5
SPECIAL FEATURES:
BRIGHTNESS CONTROL:
• Press the “Brightness” button 5 times; to achieve
your preferred level of brightness – Select either
a low, medium or high brightness level.
NOTE: Only the “Steady” function has this
brightness control capability.
TIMER FEATURE:
• Press the “Timer” button; the lights will flash
GREEN 3 times – Indicating that the 6 hour “On” /
18 hour “Off” timer has now been activated.
• Note: The lights will automatically resume back
to the “On” position – 24 hours from when it was
initially activated.
• Press the “Timer” button again, the lights will flash RED 3 times – Indicating that
the timer feature has now been deactivated.
lue
Tooth
BLUE TOOTH:
• In order for your Garden Pixel Lights to synchronise with your phone’s music selections;
first press the “Blue Tooth” button located on the remote control provided.
Located in the “Settings” section of your phone; select “Blue Tooth”, select device
“LED_UP” in order to connect. Once connected; make your music selection accordingly.
1. If the Garden Pixel Light does not illuminate press the on/off button
on your remote control. If failure to light persists, the battery within
the remote control, may need to be replaced. Insert a standard
CR2025 battery.
NOTE: The 15 Garden Pixel Light’s 131 function lighting capability is
controlled solely by the use of the remote control provided.
NOTE: By reducing the distance from your Garden Pixel Lights; you
may achieve better remote control reception.
2. If an individual Garden Pixel Light fails to light; you are able to
remove said light by unthreading the coaxial connections. You can
then reconnect the Garden Pixel Lights that are still operating, again,
by the male and female coaxial connections (Fig 6).
TROUBLESHOOTING
Fig 6
Light
Count
LIGHT COUNT:
2 special pattern programs have been installed into your 15 pc Garden Pixel Light
Set.
NOTE: An additional 2 special pattern programs are available upon connecting a
second 15 pc Garden Pixel Set.
When you press the Light Count button, blue lights will flash once;
indicating that the 1st special pattern has now been activated.
When you press the Light Count button again, blue lights will flash twice;
indicating that the 2nd special pattern has now been activated.
Upon a second 15 pc Garden Pixel Light Set being added-on; a third and fourth
special pattern program is now available.
NOTE: The maximum connect-ability of your 15 pc Garden Pixel Light Set is (2)
sets. A total of 30 Garden Pixel Lights.
Light
Count
Light
Count
Pattern 1
(1 x 15)
Pattern 3
(3 x 5)
Pattern 4
(5 x 6)
Pattern 2
(2 x 15)
15”
11.5”
2020 QVC
Garden Pixel Lights - 131 Function RGB - Instruction Sheet (English)
Date: 3/18/2020
This device complies with Industry Canada’s license-exempt RSSs.
Operation is subject to the
(1) This device may not cause interference; and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
following two conditions:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire
de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.