SDS

Reference No: WTX20X07045352B Page 5 of 12
Waltek Testing Group (Shenzhen) Co., Ltd.
http://www.waltek.com.cn
Hazardous
Combustion
Products
Carbon
Explosion Data
Sensitivity to Mechanical Impact: No.
Sensitivity to Static Discharge: No.
Protective
Equipment and
precautions for
firefighters
As in any fire, wear self-contained breathing apparatus
pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Section 6 – Accidental Release Measures
Personal
Precautions,
protective
equipment, and
emergency
procedures
Personal Precautions: Avoid contact with skin, eyes or clothing. Ensure adequate
ventilation. Use personal protective equipment as required. Evacuate personnel to
safe areas.
Other Information: Refer to protective measures listed in Sections 7 and 8.
Environmental
Precautions
Refer to protective measures listed in Sections 7 and 8. Prevent further leakage or
spillage if safe to do so.
Methods and
material for
containment and
cleaning up
Methods for Containment: Prevent further leakage or spillage if safe to do so.
Methods for cleaning up: Pick up and transfer to properly labeled containers.
Section 7 – Handing and storage
Precautions for
safe handling
Handling: In case of rupture. Use personal protection equipment. Avoid contact with
skin, eyes or clothing. Ensure adequate ventilation. Do not breathe
dust/fume/gas/mist/vapors/spray.
Conditions for
safe storage,
including any
incompatibilities
Storage: Keep containers tightly closed in a dry, cool and well-ventilated place.
Incompatible Products: Strong acids. Strong oxidizing agents. Strong bases.