Datasheet

www.i-led.co.uk
Intelligent LED Solutions, Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW
Telephone: [phone] Email: [e-mail] Web: www.i-led.co.uk
A division of Intelligent Group Solutions Ltd
7
© IGS Version V1 June 2019
DATASHEET
ILS Driver Part No. Rating Current IP Rating Output Volts
IZCVAR-040M-9020C-SAL 40W 350mA,
500mA,
600mA,
700mA,
900mA,
1050mA
IP20 350mA 2-100V,
500mA 2-80V,
600mA 2-67V,
700mA 2-57V,
900mA 2-57V,
1050mA 2-40V
IZC070-050A-9267C-SA 50W 700mA IP67 24-72V
IZC050-060F-9067C-QA 60W 500mA IP67 40-110V
IZC070-075A-9267C-SA 75W 700mA IP67 54-108V
IZC140-120M-9065C-SAL 120W 1400mA IP65 54-108V
Thermal Interface Material Options
ILS have produced a range of high-performance, cost effective Thermal Interface Materials to match perfectly their
standard products. Our product fills the air pockets between the two surfaces, forming a continuous layer to conduct
heat away from the LED to the Heatsink. As the PowerStar generates little heat, TIM is therefore not needed. Our double
sided thermal tape would be suitable for fixing the PowerStar to a fixture, Heatsink and flat substrate.
Product Non Adhesive Single Sided Adhesive Double Sided Adhesive
PowerStar
ILA-TIM-STAR-0A ILA-TIM-STAR-1A ILA-TIM-STAR-2A.
Other sizes are available, including customised parts
Assembly Information
z The mounting of the PowerStar has to be on a metal Heatsink.
z In order to optimise the thermal management, the metal surface needs to be clean (dirt and oil free) and planar for
the best contact with the LED module. A thermal grease or heat transfer material is highly recommended.