User Manual

ManualsBrandsLEDGlow ManualsLighting4pc.-10pc. Single Color Wireless LED Underbody Kit

Adding or replacing your wireless remote

1. The included wireless remote is already pre-programmed. This setup is only needed when replacing an existing remote or by adding additional remotes to your

system. You may program up to 3 remotes to each control box.

2. In order to program the remote to the control box you must turn the kit off.

a. First Remote - Press and hold the mode button on the remote and the mode control box on the control box for 5-7 seconds. Test the operation with the

remote.

b. Second Remote - Press and hold the mode button on the remote and the mode control box on the control box for 5-7 seconds. Test the operation with the

remote.

c. Third Remote - Press and hold the mode button on the remote and the mode control box on the control box for 5-7 seconds. Test the operation with the

remote.

Once you have installed your LED lighting kit, power the kit on using the 4 button wireless remote or the buttons located on the control box to

ensure that it is fully functional.

Using the Control Box & 4 Button Wireless Remote

Power Button

 Pressing this button on the control box or wireless remote will turn your kit on and

off.

Speed Change Button

 Pressing this button on the control box or

wireless remote will allow you to select from 5

different speeds for your selected pattern.

 If your kit is in music mode, this button will

adjust the sensitivity of the selected music mode.

Mode Button

 Pressing this button on the control box or wireless remote allows you to

change the current pattern displayed on your kit. There are 12 distinct

patterns, as well as 5 unique music modes. The patterns are listed below:

 Solid Illumination Mode

 Flashing Mode

 Flashing Front Chase

 Flashing Back Chase

 Steady Front Chase

 Steady Back Chase

 Front Running Chase Mode

 Back Running Chase Mode

 Outside to Inside Flash

 Inside to Outside Flash

 Flash Pattern

 (5) Sound Activation Modes

Color Change Button

 This button is not used with LEDGlow’s Single

Color LED Underbody Kit.

For accessories, replacement parts and/or technical support please visit www.LEDGlow.com for more information.