Manual
The PIN code of your Ledger Nano X device prevents unauthorized access to your crypto
assets. Your PIN code is chosen when you first set up the device, but you can change it
at any time.
Before you start
✓ Your device is set up and runs the latest firmware.
✓ Check our article on PIN code and recovery phrase security.
Instructions
1. Turn on and unlock your Ledger Nano X.
2. Hold both buttons to accesss Control Center.
3. Navigate to Settings > Security > Change PIN.
4. Choose a new PIN code of 4 to 8 digits.
5. Confirm the new PIN code by entering it again.
6. Enter your old PIN code to validate.
7. The PIN code is now successfully changed.
Security tips
● Choose your own PIN code. This code unlocks your device.
● An 8-digit PIN code offers an optimum level of security.
● Choose a PIN code that's hard to guess.
Learn more
● Maximize your account security with a passphrase (advanced users).
● Contact Ledger Support in case you require assistance.
Advanced passphrase security
Set up a passphrase to add a layer of security to your crypto assets. This option is only
recommended for advanced users. Carefully read this article before setting up a
passphrase.
Security tip
The recovery phrase and passphrase functionalities enable a range of security setups.
You may use them to design the security strategy that meets your personal situation.
Please do not overcomplicate things, the best security setup is one that you master and
can execute with confidence.
How the passphrase works
23