Manual

Set up Bluetooth connection

Set up an encrypted Bluetooth connection between your Ledger Nano X device and

Ledger Live on your smartphone to manage your crypto assets on the go. Alternatively,

Bluetooth can be disabled to connect via USB only.

Bluetooth pairing

Pair your Ledger Nano X the first time you set it up with your smartphone.

1. Make sure Bluetooth is enabled on your smartphone and on your Ledger Nano

X. Start the pairing in Ledger Live mobile.

2. Tap on the Ledger Nano X once it’s available in Ledger Live mobile. It may take a

few moments for a pairing code to be displayed on both devices.

3. If the codes are the same, confirm the pairing on your smartphone.

4. Press both buttons on your Ledger Nano X to confirm the pariring.

5. Press both buttons to Allow Ledger Manager. The pairing is complete after the

authenticity of your Ledger Nano X has been checked by Ledger's secure server.

The pairing persists in your global smartphone settings. The pairing code does not have

to be confirmed again until you forget the device in the Bluetooth settings of your

smartphone.

Disable Bluetooth connectivity

By default, Bluetooth is enabled once you've set up your Ledger Nano X.

1. Turn on and unlock your Ledger Nano X.

2. Hold both buttons to access the Control Center.

3. Navigate to the Bluetooth symbol using the right or left button.

4. Press both buttons to disable Bluetooth. The Bluetooth status displays disabled.

5. The setting takes effect the next time you start the device.

Use your Ledger Nano X without Bluetooth

To use your Ledger Nano X via USB:

● Desktop: Use the USB-C cable that came with the Ledger Nano X to connect it to

your desktop computer. Manage your crypto with Ledger Live desktop or any

other compatible (web) app.

● Mobile: Use an OTG-cable to connect your Ledger Nano X to your Android

smartphone (iOS not supported). Manage your crypto with Ledger Live mobile or

any other compatible (web) app.

Change your PIN code