Manual

Set auto-lock and power off

Set auto-lock or auto-power off to automatically lock or shutdown your Ledger Nano X

device after a period of inactivity. The PIN code is then required to unlock it. It is

recommended to enable auto-lock or auto-power off for optimal security.

Instructions

Enable auto-lock

1. Turn on and unlock your Ledger Nano X.

2. Hold both buttons to access Control Center.

3. Navigate to Settings. Then press both buttons to validate.

4. Go to Security and press both buttons to validate.

5. Press both buttons to enter the Auto-lock menu.

6. Select one of the following options:

○ No auto lock

○ 1 minute

○ 2 minutes

○ 5 minutes

○ 10 minutes

7. Press both buttons to activate the corresponding auto-lock option.

If you've enabled auto-lock your device will show bouncing Ledger logos when it's been

locked automatically. To unlock, any button and enter your PIN code.

Enable auto power off

1. Turn on and unlock your Ledger Nano X.

2. Hold both buttons to access Control Center.

3. Navigate to Settings. Then press both buttons to validate.

4. Go to General and press both buttons to validate.

5. Press both buttons to enter the Auto power off menu.

6. Select one of the following options:

○ Never power off

○ 1 minute

○ 3 minutes

○ 5 minutes

○ 10 minutes

7. Press both buttons to activate the selected option.

If you've enabled auto power off your device will automatically turn off after the

configured duration of inactivity.