User Guide

HOW TO SETUP
SIGNATURE
SLIDE
BEFORE YOU START
For fun and effective setup, prepare to get
wet. Throw on your bathing suit, gather your
setup materials and jump in!
REQUIRED TOOLS
1 KEY 1 WATER HOSE
IMPORTANT NOTE
Moving the slide requires more than one
person. Lift to move, do not drag the Slide,
as it will scratch and damage the product.
WARNING
One child at a time. Don’t stand/dive from slide.
Misuse leads to serious injury. Don’t use if
physically impaired. Look for people and objects
below. Ages 3+ 70 lbs (32kg) weight limit.
Adult supervision required at all times. For use
in maximum 18 in. water depth. Failure to
position slide in proper location could lead to
serious injury or death.
DANGER
Alternate setup methods are not recommended. Please adhere to the
guidelines outlined above to avoid scratching or damaging your Barstool.
NO Sliding
back rst
NO Sliding
head rst
NO Slide on
ledge, landing
in pool
No Slide outside
of pool, landing
in pool
No Slide outside
of pool, landing
on ledge
Slide sitting upright
with feet and arms rst
Proper Positioning:
Slide on ledge,
landing on ledge
FOR USE IN-POOL
STEP 1: Carefully remove Slide from packaging,
place near tanning ledge and grab your water hose.
STEP 2: Using the included key, remove the plug
at the top of the Slide deck. Do not discard the
removed plugs, you will use them again in Step 5.
STEP 3: Place the slide inside your pool on your
tanning ledge. The slide will be buoyant to start.
STEP 4: Using a water hose, fill the Slide while making
sure it remains in your desired location on the ledge.
Once filled, repositioning could damage the Slide.
STEP 5: Once the Slide is filled completely, replace
plug at the top of the slide deck.
STEP 6: Time to play! Take a photo, share it on social
media and tag #LEDGELOUNGER. We care about all
of our little Ledge Lounger lovers, so remember,
adult supervision while using the Slide is required.