User Manual

10 P/N 54A0028-2 012017© 2017 LeddarTech Inc. Printed in Canada. All rights reserved.
DIP Switches
The DIP switches are used for the configuration of the serial port number 1. This
port is configurable to these EIA electrical interfaces for the following standard serial
communication ports:
 RS-232
 RS-485 two-wire configuration
 RS-422/RS-485 four-wire configuration
Table 1: Communication port configuration (for 6 positions DIP switch)
NOTE: On all port configurations, the module is still a half-duplex slave.
Interface
DIP switches position
1
2
3
4
5
6
RS-232
OFF
OFF
ON
OFF
OFF
X
RS-485
two-wire
configuration
ON
ON
OFF
ON
ON
X
RS-422
RS-485
four-wire
configuration
ON
OFF
ON
OFF
OFF
X