User Guide

54A0049_7.0_EN / Leddar Pixell – User Guide 93 | 127
3. In the Ethernet Properties window, select Internet Protocol Version 4 (TCP/IPv4), then click
Properties.
Fig. 75: Ethernet Properties window
4. Select Use the following IP address: and enter an IP address different from the sensor (for example,
192.168.000.100) in the IP address: field.
5. Enter the same subnet mask as the sensor (255.255.255.0 by default) in the Subnet mask: field.
Fig. 76: IP address and Subnet mask fields