User Guide

54A0049_7.0_EN / Leddar Pixell – User Guide 69 | 127
Table 22: Record Replay window
Button/Feature
Description
Click Browse… to select the record file of the scene that you want to view again.
Once selected, the name of the file will appear next to the Browse… button.
Click the Play button to start the recording.
Click the Stop button to end the recording.
Click the Previous or Next button to move either to the previous or to the next
frame.
Position
Move the Position slider to go to the desired position in the recorded file. The
indication of the position is located above the Play and Next buttons, for example,
.
Playback Speed
Move the Playback Speed slider to change the playback speed in order to see
the scene or the detected object more accurately. The percentage indicates the
speed of the playback, for example, .
Loop
Select this option to automatically loop back to the beginning of the recording.
Click Start to tag the position to start the extraction.
Click End to tag the position to end the extraction.
Click Extract to extract a part of the scene and save it as an .ltl file. See section
10.4.1.4 below for more details.
10.4.1.4. Extracting a Scene Segment
This feature allows you to extract a segment from a previously recorded scene.
1. Click Browse… to select the record file to play.
2. In the Open window, select the desired record file and click Open.
3. Click to start the playback.
To extract a record file segment:
1. Move the Position slider to the position to see the file segment start and click .
2. Move the Position slider to the position to see the file segment stop and click .
Alternatively:
1. Play the record and stop it at a position of interest, then click .
2. Restart playing the record and stop it again at a position of interest, then click .