User Guide

68 | 127 © 2021 LeddarTech Inc.
A pop-up window appears where you can select the starting and ending lines for the recording. The selection
ranges from 1 to 8.
If you want to record one line only, Line 4, for example, select “4” in the Starting Line and Ending Line fields,
respectively.
Fig. 54: Recording Starting and Ending Lines
3. Click Record to record a scene.
A counter starts at the bottom left of the main window next to the name of the sensor.
To stop recording the detection scene, select Stop Recording in the File menu.
10.4.1.3. Replaying a Recording
To access this function, disconnect from the sensor and click File > Replay.
Once you have completed a recording, this option allows you to review the recorded *.ltl file and extract
parts.
1. Click File > Replay. The Record Replay window appears:
Fig. 55: Record Replay window upon opening
2. Click Browse… to select a file.
Fig. 56: Record Replay window with an open file