User Guide

54A0049_7.0_EN / Leddar Pixell – User Guide 67 | 127
10.4.1. Recordings (.ltl File)
Detection records provide playback of detections recorded by a device. This visual information can be useful
for verification, troubleshooting, or training purposes. Detection records provide a full data playback stored
in an .ltl file that you can later reload and replay.
10.4.1.1. Setting up Recording Settings
Under Settings > Preferences > Recording, select Recorder.
1. Select a directory.
2. Specify a Maximum file size (minimum 1 MB and maximum 500 MB).
3. Select Log debug information only if requested by LeddarTech to activate troubleshooting information.
Selecting this option activates advanced debug features and is inefficient for long recordings.
4. Specify a Maximum record time (minutes) (minimum 1 minute and maximum 71 582 minutes).
5. Click OK.
The filename of the recording will be the device name followed by the date and time of the recording.
When recording for a long period of time, an additional file is automatically created every time a recording
exceeds 500 MB.
You can change the name of the file by changing the device name (see section 10.5.1 on page 72) or after
the recording.
Fig. 53: Recording settings
10.4.1.2. Recording a Scene
To start recording the detection scene:
1. Under Settings > Preferences > Recording, specify the maximum file size and maximum record time.
See section 10.4.1.1 above for more details.
2. In the File menu, select Start Recording.