User Guide

62 | 127 © 2021 LeddarTech Inc.
Parameter/Feature
Description
Range/Value
Color Options
This section allows you to change various parameters related to
the color map:
• Amplitude
• Distance
• Minimum color (Min Color)
• Maximum color (Max Color)
• Amplitude display limits
• Distance display limits
• Log scale
Varies
Amplitude
Distance
Select the Amplitude or Distance option depending on the way
you want to view the detections.
If you select Amplitude, specify the minimum color and maximum
color, and the amplitude display limits if you want to view the
detections.
If you select Distance, specify the minimum color and maximum
color, and the distance display limits within which you want to view
the detections.
Varies
Min Color
Max Color
Indicates the range by which the color map may vary.
Values below the specified Min Color will be blue and values
greater than the specified Max Color will be red.
The color of the values between these ranges will vary linearly.
The maximum amplitude is 262 143 by default.
Setting a value in both fields will result in a range of amplitude to
display.
0 to 262 143
Amplitude
Display Limits
Indicates the lower and upper limits of amplitudes to display.
Detections with an amplitude value out of the range will not be
displayed.
0 to 530 000
Distance Display
Limits
Indicates the lower and upper limits of distances to display in
meters or feet. Detections with a distance value out of the range
will not be displayed.
To set unit preferences, see section 10.7.1 on page 82.
0 to 300
Log Scale
Select this option to switch from a linear scale to a logarithmic
scale and conversely.
N/A
Other Options
The Other Options section allows you to select the appropriate
following options according to the desired criteria:
• Display axis
• Display FoV
• Invert X, Y, or Z
• Swap X, Y, or Z
• Freeze
• Background Color
• Background Grid
• Export Configuration
• Import Configuration
Varies