User Guide

58 | 127 © 2021 LeddarTech Inc.
Menu
Description
Device
Click Device to access the following menu options:
Device > Disconnect
Device > Configuration > Device Name…
Device > Configuration > Acquisition
Device > Configuration > Network
Device > Action > Reset to factory default configuration
Device > Action > Update
Device > Debug
See section 10.5 on page 71 for more details.
View
Click View to access the following menu options:
View > Serial Port Viewer
View > State
View > Raw Detections
View > 2D Matrix Viewer
See section 10.6 on page 74 for more details.
Settings
Click Settings to access the following menu options:
Settings > Preferences
Settings > Licenses
See section 10.7 on page 82 for more details.
Help
Click Help to access the following menu options:
Help > User Guide
Help > About
See section 10.8 on page 83 for more details.
Table 19: Main window toolbar and Display Parameters icon
Icon
Description
The Connect icon allows you to connect to a sensor. Once connected, the
Connect icon will change to Disconnect.
The Disconnect icon will then allow you to disconnect the sensor from the
system.
The Apply icon allows you to confirm and apply the changes you just made to the
system with respect to the sensor.
The Undo icon allows you to revert to the information displayed before making
your changes or before specifying parameters, for example.
The Reset Camera icon allows you to select between three different types of
views for the signal display:
• Bird’s-eye view
• Top view
• Front view
See section 10.3.1 on page 64 for more details.
Click Zoom in to zoom in the display.