User Guide

54A0049_7.0_EN / Leddar Pixell – User Guide 55 | 127
If the window above is not displayed, see Appendix A on page 90.
4. In the Connection window, under Select a connection type, select LeddarAuto.
The first time the sensor is connected to a computer, a few seconds are required for Windows to detect
it and complete the installation.
5. a) If the sensor is automatically detected, select the available sensor from the list.
b) Otherwise, enter the IP address 192.168.0.2 and Port number 48630.
6. Click Connect to connect to the available sensor.
The color of items in the list indicates the status of a sensor.
• Black: This sensor is available. No user is connected to it.
• Blue: There is a user connected to this sensor.
• Red: Unable to communicate. If the sensor does not respond to requests after some time, it is
displayed in red.
Fig. 45: Steps to connect to Leddar Configurator
2
3
4a
4b
5