User Guide
54 | 127 © 2021 LeddarTech Inc.
9. Installing Leddar Configurator
1. Download LeddarInstall.exe via the provided link. Contact LeddarTech at support@leddartech.com if
you did not receive the link.
2. Double-click the file to start the installation.
3. If the Windows Security dialog box opens, click the Install button to accept the installation of the drivers
from LeddarTech during the process.
Fig. 43: Windows Security dialog box
4. Follow the steps in the Welcome to the Leddar™ Configuration Software Setup Wizard.
Refer to Appendix B on page 92 for the detailed procedure on configuring the network with a
static IP.
Connecting to Leddar Configurator
To connect your sensor to Leddar Configurator, follow the steps below.
1. On your computer desktop, click the Leddar Configurator icon ( ) to open the software.
2. Click to connect to the sensor.
3. Select Public networks (…) to bypass the Windows firewall.
Fig. 44: Bypassing Windows firewall window