User Guide

54A0049_7.0_EN / Leddar Pixell – User Guide 29 | 127
Leddar Pixell offers minimal dead zones, as seen in Fig. 15 below. This hardware configuration reduces the
possibility of missing an object, as there is only a 6-cm width between the sensor windows. The width
progressively reduces to completely disappear after 1 m.
Fig. 15: Emission minimal dead zone
Depending on the distance, the overlap in the horizontal FoV varies from no overlap to up to 2 segments at
long distance. This is valid for each side.
Dead-zone distance
1 m (typical)