Manual

Leddar™One Sensing Module 31
Undo
Click the undo button ( ) to erases all the changes you have made to the
parameters since the last apply action or connection.
4.4. Using Leddar™ Configurator
This section presents the procedures to view, configure, and analyze
detections from the sensor using Leddar™ Configurator.
4.4.1. Configuring Serial Port
The sensor serial port settings are configurable.
To open the Communication Settings dialog box, on the Device menu,
point to Configuration and click Communication.
Figure 15: Device Menu for the Communication Configuration
The numbers are modified by using the arrows or by entering the value
manually.
Table 11: Sensor Serial Port Setting Description
Parameters
Values
Baud Rate
Transmission rate of 9600, 19200, 38400, 57600, or 115200 bps
Address
Modbus device address 1 to 247