Data Sheet

Features
Beam 3
o
Interfaces 3.3 V UART or RS-485
Wavelength 850 nm
Power supply 5 V
Diameter 50.8 mm
Weight 14 g
1 2 3 4 5 6
GND IRQ 5 V
RX or
RS-485+
TX or
RS-485-
RESET_N
Detection range
0 to 40 meters (130 ft.)
1
Accuracy 5 cm
Data refresh rate Up to 70 Hz
Operating -45
o
C to + 85
o
C
temperature range
Meets IEC 62471: Exempt lamp classification
2006 criteria
Distance precision
5 mm
Distance resolution 3 mm
Power consumption 1.3 W
1
Varies according to target.
Optional Accessories:
- USB to 3.3 V UART cable (part number: 74D0002)
- USB to RS-485 cable (part number: 74D0001)
- Bracket for standard tripod mount (1/4” – 20) — (part number: 74D0003)
- Expansion module with PNP/NPN, 4–20 mA, 0–10V, RS-485 (available upon request)
The chart above displays the detection amplitude of a sensor for three reference objects
(photography grey cards and reflective tape) of varying size and
reflectivity.
www.leddartech.com
System performance
54C0001-6- 062015 - Printed in Canada - Copyright LeddarTech Inc. © 2015 All rights reserved.
Ordering Information
LED - MOD1 - 3 - XX
Interfaces
10 = 3.3 V UART
20 = RS-485
Interface pinouts
Dimensions
Leddar
TM
is a registered trademark of LeddarTech Inc. Leddar
TM
technology is covered by one or more of the following U.S. patents: 7635854, 7640122, 7855376, 7895007, 7917320, 8159660, 8242476, 8310655, 8319949, 8436748, 8600656, 8619241, 8723689, or international equivalents.
Other patents pending. The content of this datasheet is subject to change without notice
Amplitude vs. Distance
Mechanical Integration
- Easy to install (3 screws)
- Ideal for NPT tting
Legend:
RX/TX = 3.3 UART
RS-485+ / RS-485- = RS-485
The power and interface signals are included on a six-pin standard 0.1” pitch header. The RS-485
option, in combination with MODBUS, makes it easy to integrate multiple sensors with an RS-485
network.