Product Warranty
VI. Assembly Instructions
VII. Instructions for Use
VIII. Technical Specications
• Model No: FLEXPAD
• ONLY USE SUPPLIED USB Power Supply.
• Device includes on/off switch; all settings are set at the factory.
• The dpl® Flex is NOT user serviceable.
• Operating Temperature: 0°C to +27°C (32°F - 80°F)
• Relative Humidity: 85%
• Storage Temperature Range: -30°C to +55°C (-22°F to +130°F)
• Wavelengths: Infrared LED 880nm, RED LED 660nm
• Power: 9 Watts, 12 Volts
1. Attach Velcro® straps to back of pad.
2. Adjust Velcro® length to comfortably t desired body area (back, leg, arm, etc.) for treatment.
3. Place dpl® Flex on body and secure Velcro® strap.
4. Insert USB plug from pad into any USB port or into the provided USB power supply.
5. Plug power supply into electrical outlet.
6. Press on/off switch to the on position to start device.
7. Move on/off switch to the off position to stop device.
1. Place dpl® Flex on body and secure Velcro® straps.
2. Insert USB plug from pad into any USB port or into the provided USB power supply.
3. Plug power supply into electrical outlet.
4. Press on/off switch to the on position to start device.
5. You can only see the Red LEDs; the others are in the Infrared light spectrum and can’t be seen with
the human eye.
6. Treatment time is 20 minutes. The device may be used multiple times per day.
7. Move on/off switch to the off position to stop device.