Manual

4. Return Col: line connected like “ ” column by column
5. Shortest distance: connect the nearest dot.
6. Shortest distance row: connect the nearest dot, considering the regularity of a row
3.2 Controller ports
Drag mouse in working area and several lines are added as follows:
When the pixel number of a port is more than the limit pixels number, the exceeded
pixels will be added to next port. The pixels number of a route (port) displays in the left
count list (as the right image shows).
3.3 Module
Signal pixel
3.4 Line limit pixels
When adding pixels to a route, if the pixel number is more than the limit number, then
the exceeded pixels will be added to next port.
3.5 Confirm line number of a slave controller
A port is a line. Choose a few lines to share a slave controller on the need of a few
ports. For example, we need three ports, and then select "three lines of one slave
controller" in the software. If select “two lines with a slave”, then line 1 and 2 are the first
slave controller, line 3 and 4 are the second controller, line 5 and 6 are the third slave
controller.
3.6 Connect route by background
For complex images, you can select “Connect by background” to assist design. Click “Setting” –
“Connect by background”. There are several methods to set background. There will be detailed