Datasheet

5 - PRODUCT DATA SHEET v181203

EX7R

PRODUCT SERIES

The Ledlenser EX series

If you’re working in explosive environments, safety is extremely important when it comes to electronics. Safety which is defined in

the ATEX directives of the European Union. Lamps in the Ledlenser EX and iL series meet these standards in every respect.

Designed specifically for contact with explosive gases, vapors and dust in the best possible groups IIC and IIIC. Featuring dust and

water protection, and certified to ATEX and IECex. Yet both lines - in accordance with the ATEX workplace directives - are designed

for different types of explosion hazards. The Ex-series is suitable for areas where explosive atmospheres are regularly present

(zones 0, 1 , 20 or 21) and the iL- series for Zone 2/22. So you’ll find the perfect lamp for any environment.

FOOTNOTES

The information pertaining to scope of delivery, appearance,

performance, dimensions and weight corresponds to the

information available at the time of publication. In the interest

of product development, we reserve the right to change scope

of delivery, appearance, design and color without prior notice.

Product images may vary from the actual products and may

show optional accessories which can be purchased separately.

Errors and omissions excepted.

1) Measurements according to ANSI FL1 on the respective

setting. Average values, in some cases, deviations by +/- 15 %

may occur due to technical reasons. If no setting is explicitly

indicated, the values refer to luminous flux (lumens/lm) and

lighting range (meters/m) on the highest setting and to battery

duration (hours/hrs/h) on the lowest setting. A boost function

(if available) can be used several times, but only for short

periods of time. If no setting is explicitly indicated,

measurement is based on “energy saving mode.”

2) Calculated capacity value in watt-hours (Wh). This applies to the

delivery state of the battery/ies inside the respective item, or for

lights with rechargeable battery/ies, to the rechargeable

battery/ies inside the product when fully charged.

3) EP Patent 1880139, US Patent 7,461,960

4) Warranty period of five years from the date of purchase, seven

years if the product is registered online on our website. The

warranty is valid worldwide and legal warranty rights also apply.

It covers defects in materials and workmanship. For the proper

functioning of rechargeable batteries a different warranty period

of 24 months applies. Excluded from this warranty are the

products of the “Solidline” series, Ledlenser K1 and Ledlenser K2.

The warranty does not apply to defects in batteries, holsters,

pouches, remote switches, color filters, imprints or surface

coatings. The guarantor is Ledlenser GmbH & Co. KG, Kronenstr. 5

- 7, 42699 Solingen, Germany. More information:

ledlenser.com/warranty

5) Charging time varies by hardware used.