User Manual

WS2813
Intelligent control LED
integrated light source
9 / 11
 Repairing instruction
Normally, it can’t be repaired after reflow. You need to use double-ended solder iron and make sure that whether it will
do damage to the LEDs’ characteristics when repairing is inevitable.
 Storing and Transporting
1．Scope of application
Front side up, moisture-proof and waterproof, no extrusion, no collision and no vibration.
2．Storage and its period
1 Room temperature sealed storage: 20℃～30℃, 40%～60%RH, product is valid for ONE month.
2 Moisture-proof sealed storage: 20℃～30℃, 25%～60%RH, product is valid for THREE month.
3 Use up with 2 hours after removing from packages.(Environmental conditions for temperature <30℃,
relative humidity<60%)
 Dehumidification
We would recommend to do dehumidification if they exceed the valid storage period of products or dampened due to
other reasons.
Dehumidification Method: 70℃-75℃/22±2 Hours
 Electrostatic Protection
LED is an electrostatic sensitive component, although the LED products are with excellent anti-static ability, they will
cause a certain damage by any electrostatic discharge. By taking some electrostatic measures to avoid the damages when
using the LEDs, such as wearing anti-static gloves and anti-static bracelet, etc..
 Precautions
Pressing the colloid surface will affect the reliability of LED because the LED is advanced silicone-gel. And therefore
precautions should be taken to avoid the strong pressure on the component. It’s proper to make the LED be used in safe
condition when using a suction nozzle. Silicon packing with soft and elastic, it greatly reduces thermal stresses and
unable to bear external mechanical forces. Therefore, preventive measures should be taken in process of manually
handling.
LED COLOR