Product Card

All enquiries P: [phone] E: [e-mail], www.ledautolamps.com
All efforts are made to ensure all information is correct and up to date, it can be subject to change without notice. All measurements are in millimeters (mm) and are not to scale.
® All LED Technologies designs are registered throughout the world. - Current as of 24/03/2020
284 Series Rear Combination Lamp
Function
Stop/Tail/Indicator/Reverse/Reflector
Size
284mm x 100mm x 37mm
Voltage
10-30 Multivolt
Cable
28cm
Lens
Polycarbonate
Base
Polycarbonate
Draw Stop Tail Ind Rev
@13.8V
0.18A 0.14A 0.30A 0.14A
@28V
0.08A 0.07A 0.15A 0.08A
Approvals Function Approval No.
ECE
Stop/Tail E9*7R02/27*22553*00
ECE
Indicator E9*6R01/28*22553*00
ECE
Reverse E9*23R00/22*22553*00
ECE
Reflector E9*3R02/7*22553*00
• Exclusive Design
• Sequential Indicator
• Diffused Tail Function
• ECE Australian Road Approved
• IP67 Rated
• 5 Year Warranty
ECE
Approved
100%
Water Proof
5 Year
Warranty
284mm
100mm
37mm
116mm
SEQUENTIAL IndicatorsSEQUENTIAL Indicators
Diffused Tail Function
Part Number
284ARWM-2
- Twin Blister
284ARWLMB
- LHS, Bulk
284ARWRMB
- RHS, Bulk
Fitting Instructions
Surface mount using bolts in back of lamp, run wire and plug through 10mm
hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.