User Manual

3
Rio Rancho, NM - USA
Digital-hybrid, Frequency Agile Handheld Transmitter
INTRODUCTION
Thank you for selecting the Lectrosonics UT400 hand-held wireless transmitter. The
UT combines over 80 years of engineering experience with the very latest components
in a design that addresses the most demanding professional applications.
The design of the UT400 was the direct result of numerous conversations with users,
staging and touring companies and dealers across the US. The specific concerns and
needs brought up in these conversations led directly to the development of the opera-
tional features offered on the UT400. Two hundred fifty six frequencies are user
selectable in 100kHz steps to alleviate interference problems in travelling venues
The UT400 is an integral microphone/transmitter with an internal antenna. The antenna
is a dipole type utilizing the two printed circuit boards as the elements. The housing is
composed of durable PVC, machined to a natural, comfortable shape. Internal me-
chanical parts are machined aluminum and brass.
Only the UT400 transmitters are covered in this manual. Companion receivers are
covered in separate manuals. The UT400 will operate with any 100 Series, 200 Series
and 400 Series Lectrosonics receiver in the same frequency group.