Owner manual

UHF and VHF

SPECIFICATIONS

RF Gain: 0.5 to 1.5dB

Bandwidth

VHF: Factory tunable to any 4 MHz band from 150 to 216MHz.

Specified at time of order.

UHF: Factory tunable to any 18MHz band from 470 to 608MHz.

Specified at time of order.

RF Outputs

Standard: Four outputs, 50 Ohm, BNC

Diversity: Eight outputs, 50 Ohm, BNC

Isolation: 25dB min, any output to any output

Any output can be open, shorted, or terminated without affecting

other outputs.

Splitter type: Wilkinson 1/4 wave

Filtering:

UHF: Two pole ceramic filter per antenna

VHF: Two section helical resonator per antenna

Noise figure

VHF: 3.5dB

UHF: 3.5dB

Third Order Intercept: +19 dBm

Power Input: +12 to +24VDC

Power Consumption:

Standard: 70mA

Diversity: 140mA

Connectors:

RF: BNC

Power Output: 5.5mm OD/2mm ID coaxial power jack

Short Circuit Protection: Auto-reset thermal fuses

Construction: Machined aluminum panels, housings, and mechanical parts.

Dimensions: 19" wide, 1.75" high, 6.5" deep

Weight: 5 lbs including 4 receivers

Specifications subject to change without notice.