User guide

SPECIFICATIONS
Type: Active RF distribution system with ceramic filtering
Inputs: Two 50 Ohm BNC jack on rear panel
Third order intercept: +27dBm at input
Outputs:
Type: 16 BNC jacks on rear panel. Eight jacks per antenna.
Isolation: 25dB min, any output to any output
Any output can be open, shorted, or terminated without
affecting other outputs.
Splitter type: Wilkinson 1/4 wave
Frequency Range: 470 to 865MHz, factory set (See serial number sticker on
side panel for frequecny range of your particular unit.)
Filter bandwidth: 16 to 50MHz, factory set
Input/Output RF gain 1 to 2dB at center of band
Power Requirements: 95-240VAC or 11 to 14VDC
Overload protection provided by internal auto-reset circuit breaker.
Power consumption: Nominally 110-220VAC, 10 Watts
Nominally 340mA at 12VDC
Dimensions: 19 x 7 x 1.75 inches
Weight: 2 lbs., 9ozs.
Specifications subject to change without notice.
This product meets the CE Compliance Standards - EN55022 and
EN50082-1:1998. A copy of the Declaration of Conformity may be
requested from your dealer or by contacting the factory directly:
Lectrosonics, Inc.
Marketing Department
581 Laser Rd. NE, Rio Rancho, NM 87124 USA
tel: [phone] fax: [phone] e-mail: [e-mail]
6