Owner's manual

UHF Wireless Digital Hybrid

Receiver

UCR511 REPLACEMENT PARTS AND ACCESSORIES

Part No. Description

32251 Velcro mounting strips

CCMINI Zippered, padded vinyl system pouch

CH12E AC power supply with US type 2-pin plug on

housing, 110 VAC input; 12 VDC, 2.8 A output.

VSR1 Thin velcro loop for power cable strain relief.

A8U UHF marine phosphor bronze antenna -

straight connector, specify block.

A500RA UHF flexible whip antenna with right angle

BNC connector (470 - 608 MHz)

PS70 A/C power supply with US type 2-pin plug on

housing, 110 VAC input; 12 VDC, 2.8 A output.

UM500 Belt-pack Digital Hybrid Wireless

transmitter

with over 50 mW power.

UMC200D Rack-mount multicoupler combining antenna

and power distribution for up to four Lectroson-

ics wireless microphone receivers. Includes

built-in power supply.

SIXPACK Portable multicoupler for field production

combining antenna and power distribution for

up to six Lectrosonics wireless microphone

receivers. Includes built-in rechargeable

battery pack for added mobility.

SNA600 Collapsible dipole antenna adjustable from 550

MHz to 800 MHz. Ideal for situations where a

full 360 degree receiving pattern is required as

opposed to a directional pattern.

ALP600 “Shark fin” Log Periodic Dipole Array (LPDA)

provides useful directional pattern over 500 to

800 MHz range. Ideal for portable applications

including temporary setups for field production.

Not intended to be left outdoors permanently.

ALP700A LPDA (Log Periodic Dipole Array) provides

useful directional pattern over a broad fre-

quency bandwidth (500 to 800 MHz).

ARG15-ARG100 Coaxial cables for remote antennas are

available from Lectrosonics in a variety of

lengths - from 2 to 100 ft. Cables include Velcro

tie wraps.

Rio Rancho, NM – USA