Owner's manual

UHF Digital Hybrid Wireless
®
Rio Rancho, NM
9
Camera Slot Adapters
SRUNI
AdapterkitforUn-
islot
®
camera slots
suchasthosepro-
videdonIkegami
®
and Panasonic
®
cameras.*Includes
bezel,hardware
andrearpanel
DB25connector
wiredforpower
and audio connec-
tions.
SRSNY
Adapterkitfor
Sony
®
camera
slots,* includes be-
zel,hardwareand
rearpanelDB15
connector wired for
powerandaudio
connections.
Installing Camera Slot Adapters
SRUNI Adapter
Thread two short
screws through the
recessed tabs on the
adapterandslide
it onto the receiver
housing. Thread two
short screws through
the tabs on the
receiver flange as
shown.
Ontheopposite
side, thread two long
screws through the
tabs on the receiver
flange, then align
them with the tabs
ontheadapter.
Slidetheadapter
upandtightenthe
retaining screws
to secure it to the
receiver flange.
The four lower
screws attach to the
camera body.
SRSNY Adapter
Twodifferenttypesofscrewsareusedtoattachthe
receiverangeandtheadapter.
Thread the smaller, thin head screws through the
adapterandintothecamerabody.
Upper screws with thicker
heads secure the receiver
to the adapter.
Lower screws with thinner
heads secure the adapter
to the camera body.
NOTE: If you are having difficulty inserting
the receiver into the camera slot, try mounting
the blue adapter plate to the camera first, then
inserting the receiver.
UniSlot
®
is a trademark of Ikegami Tsushinki Co., Ltd.
Ikegami
®
is a registered trademark of Ikegami Tsushinki Co., Ltd.
Panasonic
®
is a registered trademark of Matsushita Electric Industrial Co., Ltd.
Sony
®
is a registered trademark of Sony Kabushiki Kaisha TA Sony Corporation.