Owner's manual

SRa5P and SRa Dual Receivers
LECTROSONICS, INC.
14
The hinged joint pivots in both directions
32
470
944
33
31
21
22
23 24
25 26 27
28 29
30
20
19
AMJ KIT CUTTING TEMPLATE
Lay uncut antenna on this template and cut to length for the desired frequency block
Note: Check the scale of your printout. This line should be 6.00 inches long (152.4 mm).
Whip Length
Tr im the end of the color cap and slide the remaining sleeve over the whip - OR - Glue color cap onto the end
*Cut end of cap off
and slide over whip
Frequency Blocks
*Color cap
Jointed Whip Antennas
TheAMJantennaisageneralpurposedesignforany
Lectrosonics receiver or transmitter with a standard
SMAconnector.Thehingedjointpivotsinbothdirec-
tionsforpositioningthewhipatanydesiredangle.
470 470.100-495.600 Blackw/Label 5.56” 141.2mm
19 486.400-511.900 Blackw/Label 5.27” 133.9mm
20 512.000-537.500 Blackw/Label 4.93” 125.2mm
21 537.600-563.100 Brownw/Label 4.71” 119.6mm
22 563.200-588.700 Redw/Label 4.48” 113.8mm
23 588.800-614.300 Orangew/Label 4.27” 108.5mm
24 614.400-639.900 Yelloww/Label 4.07” 103.4mm
25 640.000-665.500 Greenw/Label 3.87” 98.3mm
26 665.600-691.100 Bluew/Label 3.68” 93.5mm
BLOCK FREQUENCY CAP/SLEEVE ANTENNA
 RANGE COLOR WHIPLENGTH