Owner's manual
SRa5P and SRa Dual Receivers
LECTROSONICS, INC.
12
Mounting and Orientation
Installationintotheslotonavideocameraplacesthe
antennasinanoptimalverticalpositionawayfromthe
camera body.
Whenusedwithnon-slotcameras,asdepictedinthe
diagrambelow,oneortworeceiverscanbepositioned
in a variety of locations around the camera body using
theVelcroandSRaSLEEVEmountingoptions.
Mounting the receiver horizontally on the side of a camera
can seriously reduce the operating range of the wireless
system.
Formaximumoperatingrange,theantennasshouldbe
verticalandabovethecamerabody.Whileitmaybe
convenient,mountingthereceiverhorizontallyonthe
sideofthecameracanseriouslyreducetheoperating
range of the wireless system.
The receiver provides stand-
alone operation with the battery
sled adapter and mounting
sleeve. It can be mounted in
any position with Velcro, or in
horizontal and vertical positions
using the mounting foot.
SRSLEEVE Mount
Anoptionalmountingsleeveisavailabletosimplify
mounting the receiver on camera body, battery brack-
ets and other locations. The sleeve is furnished with a
hook/loopVelcroswatchformountingonatsurfaces.
SRHARDWARE Cold Foot Adapter
ThishardwareandadapterkitallowstheSRSLEEVEto
bemountedona“coldshoe.”Arightanglebracketisin-
cludedsothesleevecanbemountedinahorizontalor
verticalposition.Verticalmountingisgenerallypreferred
becausetheantennaswillprovideacircular,horizontal
pattern.Forindoorapplicationswheremultipathreec-
tionsareprevalent,thebestantennaorientationcanbe
discoveredbysimplewalktestwhileobservingtheRF
levelindicatorsonthereceiverLCD.
RATPAC Connector
The5-pinRATPACrightangleconnectorisdesignedfor
thefrontpaneloutputjack.The3-pinversionisde-
signedfortherearpaneloutputsonthereceiver.
The connector can be
rotated during assembly
to exit the cable in the
desired direction. See
instructions included
with the RATPAC kit.