Owner's manual

Installation and Startup Guide

Rio Rancho, NM

Adjust to the desired value with the rotary control and

press the control to store the value. (the Crosspoint

Gain setting screen is shown here as an example)

After all values have been set, press the LEFT button to

return to the previous menu.

Output Setup

Select [OUT] in the Main Window.

Scroll to and select Output Setup.

Output Levels is a

real time bar graph

display

Select the Setup

item to adjust

output gain

Navigate to the desired output, select it and adjust the

value with the rotary control. Press the control inward to

store the setting.

After all settings have been made, press the LEFT but-

ton to return to the previous menu.

Additional Filters and Processing

After the basic signal ﬂow and levels are established,

further reﬁnements can be added with the extensive set

of signal processing built into the processor. Browse the

menus for inputs and outputs to discover the available

resources.

Rear Panel Controls

Select [RPC] in the Main Window to access a setup

menu to conﬁgure external controls such as pots and

switches. While settings can be made with the LCD

interface, it is recommended that you use the software

GUI instead.

Preset Recall and Settings

Select [PRE] in the Main Window to access a setup

menu to store and recall presets and other options to

deﬁne preset activities. It is useful for information, how-

ever, it is recommended that you use the software GUI

instead, which will provide access to presets stored on

the computer disk drive.

Global System Settings

Select [SYS] in the Main Window to access a setup

menu for a variety of global settings including head-

phone monitoring, date and time setup, timer and event

programming, front panel lockout, network interface

settings and others.