User Manual

SPDR
LECTROSONICS, INC.
8
Powering On
Press and hold the Power Button until the Lectrosonics
logo appears on the LCD.
Powering Off
Power can be turned off by holding the Power Button in
and waiting for the countdown. The Power Button will
not work while the unit is recording (stop recording first
before powering down) or if the SPDR has been locked
(unlock the recorder first).
If the power button is released before the countdown
reaches 3, the unit will remain turned on and the LCD
will return to the same screen or menu that was dis-
played previously.
Recording Screens
While recording, the screen provides a view of the bat-
tery status, timecode and the input audio level. Soft but-
tons in the four corners of the screen provide access to
the Menu, Info (available recording time if microSDHC
memory card installed, SPDR info if no card in unit),
and the REC (record start) and LAST (play last clip)
functions. These functions are invoked by pressing the
adjacent keypad button as shown on the previous page.
Battery status
Record Start
REC
i
LAST
T
C
00 : 01 : 33
-40 -20 +0
Play Last Recording
Card Info
Timecode
Menu
Audio Levels
Press the keypad
button next to each
icon to operate the
functions indicated
by the soft buttons
Amount of
space used
on card
The status indicator will alert you if there is no
microSDHC memory card in the SPDR.
REC
i
LAST
T
C
00 : 01 : 33
?
?
-40 -20 +0
Question mark
blinks
To start recording, press the REC soft button in the top
right corner of the screen using the UP arrow. The sta-
tus indicator will switch to the Recording function.
-40 -20 +0
T
C
00 : 26 : 10
i
REC
HOLD
HOLD
Recording
info
Menu
Record icon
blinks
Press and Hold BACK
and DOWN arrow to
stop recording
HOLD
BOTH
TO
--STOP--
If both buttons
are not pressed
to stop recording,
you will receive
this reminder.