User Manual

Stereo Portable Digital Recorder
Rio Rancho, NM
15
Once set as desired, use MENU/SEL to navigate to the
“GO” soft button and press the DOWN arrow button to
begin the recovery process.
Length to
recover?
08:10
hh mm
GO
Recovery is nearly instantaneous. When completed, the
display will show:
RECOVERY
SUCCESSFUL
Locking and Unlocking the Settings
The LOCKED mode protects the recorder from acciden-
tal changes to its settings. When locked, menu naviga-
tion is possible, but any attempt to alter settings will
prompt a “LOCKED/can use menu to unlock” message.
The unit can be unlocked using the Lock/Unlock setup
screen. The PDRRemote app will still work.
Using a Remote Control App
PDRRemote By New Endian LLC
Convenient remote control is provided by a phone app
available on the AppStore and Google Play. The app
uses audio tones (“dweedle tones”) played through the
phone’s speaker that are interpreted by the recorder to
make changes:
• Record Start/Stop
• Mic Gain Level Adjustments
• Lock/Unlock
The SPDR tones are unique to the SPDR, and the
recorder will not react to “dweedle tones” meant for
Lectrosonics transmitters.
The screens appear differently for iOS and Android
phones, but perform the same functions.
For Best Results
The following conditions are required:
• The microphone must be within a few inches.
• The recorder must be configured to enable remote
control activation. See Remote on the menu.
Please be aware this app is not a Lectrosonics
product. It is privately owned and operated by
New Endian LLC,
www.newendian.com.
iOS Version
Select Function
Select
Mode
Tap to
play tone
Playback
Volume
Android Version
Select
Function
Tap function
name or down
arrow to select
mode
Playback Volume
Touch and hold
to play tones