User's Manual

R400A
LECTROSONICS, INC.
20
Replacement Parts and Accessories
DCR12/A4U
SNA600
A500RA(xx)
ALP Series
DCR12/A4U
AC power supply with US type 2-pin plug on hous-
ing, 100 to 240 VAC input; 12 VDC 400 mA regu-
lated output
A500RA(xx)
UHF flexible whip antenna with Right-Angle BNC
Specify frequency block (last two digits (xx)
specify frequency block, for example: A500RA21,
A500RA22, etc.)
SNA600
Collapsible dipole antenna adjustable from 550
MHz to 800 MHz. Ideal for situations where a full
360 degree receiving pattern is required as op-
posed to a directional pattern.
ALP Series Antennas
The “Shark fin” Log Periodic Dipole Array (LPDA)
provides useful directional pattern over 500 to 800
MHz range. Ideal for portable applications includ-
ing temporary setups for field production. ALP Se-
ries antennas are not intended to be left outdoors
permanently.
ARG15-ARG100
Coaxial cables for remote antennas are available
from Lectrosonics in a variety of lengths - from 2 to
100 ft. Cables include Velcro tie wraps.
35664
Strip of four adhesive backed feet, 0.75 inches
square.
RMPR400-1
Single-space rack conversion kit for single R400A
receiver. Includes extension cables for mounting
antennas on front panel.
RMPR400-2
Single-space rack conversion kit for dual R400A
receivers. Includes extension cables for mounting
antennas on front panel.
RMPR400-1
RMPR400-2