Owner manual

EDIT LECNET MONITOR MAP ENTRY WINDOW

The Edit LecNet Monitor Map Entry window describes a single

monitor map entry.

At the top is listed the LecNet device and selected monitor. If

the required device isn’t listed or if no device is listed, use the

device list window to add devices. If the required monitor is

not available, you may use the Monitors Master List window to

create it.

At the bottom the AXlink mapping is described. Three types of

mapping are possible.

Channel useful for monitoring single on/off parameters that can change automatically (e.g.

telephone hybrid connect status). Valid channel IDs are 1-255 decimal.

Level useful for monitoring numeric parameters that can change automatically (e.g.

automatic mixer channel level). Valid level IDs are 1-8 and 9-64 decimal (see

AXLINK DEVICE SPECIFICATION for details on pseudo-levels 9-64).

8 Channels useful for monitoring bitwise grouped on/off parameters that can change automati-

cally (e.g. automatic mixer microphone status). The least significant bit is mapped to

the lowest numbered channel. Valid starting channels are 1-248 decimal.

ACTIONS MASTER LIST WINDOW

The Actions Master List window may be used to create new LecNet actions covering functions not anticipated by

Lectrosonics. Using the Actions Master List is not difficult, but you may wish to check Lectrosonics’s web site for

updates, in case the function you need has already been created (see ACTION AND MONITOR FILES in the AD-

VANCED CONCEPTS section for the web address). If the function you need to perform requires that more than

seven bytes be sent to the device, not including the LecNet address, it cannot be described as an action. AXCESS

programmers can achieve more sophisticated interchange with the SEND_STRING capability. See the AXLINK

DEVICE SPECIFICATION section for details.