User's Manual

ManualsBrandsLectrosonics ManualsPro AudioL Series LR Camera-Mount Wireless Receiver

Compact Portable Receiver

Rio Rancho, NM

and UT300.

EU Dig. Hybrid works with Lectrosonics European

Digital Hybrid transmitters with model numbers that

end in “/E01.” For example, the SMDB/E01 transmitter

is in this group.

JA Dig. Hybrid works with Lectrosonics Japanese

Digital Hybrid transmitters.

4a) Find a Clear Frequency with Smart Tune

Optimum range will be realized if the system is set

to a frequency where few or no other RF signals are

present (a “clear” frequency). The receiver can select a

clear frequency automatically with Smart Tune

Navigate to Smart Tune in the LCD menu and press

MENU/SEL to start the process. Select the desired

range to be scanned, then press MENU/SEL to start

the scan.

Entire tuning range

Individual block(NA) North American

versions

NOTE: “NA” next to the band numbers indicates

the North American version which excludes the

radio astronomy frequency allocation from 608 to

614 MHz.

Cursor scrolls

across screen

during scanning

When the scan is complete a screen will appear brieﬂy

to display the frequency chosen by Smart Tune, and

then it will change to IR Sync. If you are using a Lec-

trosonics transmitter that has an IR port, the settings

can be transferred from the receiver to the transmitter

in a few seconds with a single button.

As shown below, IR Sync will prompt you to place

the receiver and transmitter close to one another and

press the UP arrow button. Hold the units within two

feet or so apart with the IR ports facing each other,

then press the button. The transmitter LCD will display

a message conﬁrming the receipt of the settings.

NOTE: IR sync transfers the settings for

frequency, step size and compatibility mode.

If you are not using a Lectrosonics transmitter with an

IR port, simply return to the Main Window and observe

the frequency that was chosen by Smart Tune. Make

sure the compatibility mode selected in the receiver is

correct for the transmitter in use. Then set the transmit-

ter on the frequency chosen by Smart Tune.

4b) Find a Clear Frequency Manually

Navigate to RF Scan on the menu and press MENU/

SEL to start the scanning. The LCD will display a

marker that travels across the screen as a graphical

image of the RF energy appears. The marker will wrap

back to the beginning and continue to repeat.

Clear

spectrum

Strong RF

energy