User's Manual

LR
LECTROSONICS, INC.
10
LCD Menu Tree
The menus presented on the LCD are arranged in a
straightforward manner, with those that are likely to be
used more often located at the top of the tree.
Smart Tune
Frequency
IR Sync
Tx Block
B1
B1 NA
23 NA
21
22
23
SEL
BACK
Use arrow keys
to select desired
scanning range
SEL
IR Sync
Press
SEL
BACK
Frequency
Block 21 B1
555.300 MHz
Press SEL to
select desired
adjustment step
B1
Use arrow keys
to select desired
frequency
IR Sync
Press
SEL
BACK
Press UP arrow
to start transfer
RF Scan
SEL
BACK
Press SEL to stop scanning,
select WideView, ZoomView
or resume scanning
Clear Scan
SEL
BACK
scan data
CLEARED
Audio Level
SEL
BACK
SEL
BACK
BACK
Use arrow keys to scroll
cursor; SEL + arrow for
fine steps
Keep scan freq?
(select option)
Audio Level
+05 dBu
Use arrow keys
to select desired
audio output level
SEL +
Toggles 1k tone
output
Step Size
Step Size
Use arrow keys to
select step size
100 kHz
25 kHz
wait
for
scan
SEL
BACK
SEL
BACK
SEL
BACK
SEL
BACK
SEL
BACK
SEL
BACK
SEL
BACK
SEL
BACK
SEL
BACK
Tx Battery
Rx Battery
Compat.Mode
Polarity
Smart NR
Sq. Bypass
Backlight
LCD Mode
Default
Squelch Bypass
Backlight Time
Retore Factory
default settings
Tx Battery
Select from
listings
Use arrow keys to
select battery type
Rx Battery
Select from
listings
Use arrow keys to
select battery type
Compat.Mode
Select from
listings
Use arrow keys to select
compatibility mode
Use arrow keys to select
audio output polarity
Normal
Inverted
Polarity
Smart NR
Off
Normal
Full
Use arrow keys to select
noise reduction preference
Normal
Bypass
Use arrow keys to enable or
disable squelch (audio mute)
Always On
30 Seconds
5 Minutes
Use arrow keys to select
LCD backlight duration
Wht on Blk
Blk on Wht
LCD Mode
Use arrow keys to select
LCD mode
No
Yes
Use arrow keys to accept or reject
restoration of default settings
NOTE: The transmitter battery timer is
included in the Tx Battery setup screen
Group
SEL
BACK
Group
Use arrow keys to
select group
None
U
V
W
X