Instruction Manual

HMa, HMa-941, HMa/EO1, HMa/E01-B2, HMa/E02, HMa/E06, HMA/E07-941, HMa/X
LECTROSONICS, INC.
16
Firmware Update
Updating the firmware is a simple matter of download-
ing a utility program and file from the website and
running the program on a Windows operating system
with the transmitter connected to a computer via the
USB port.
Go to www.lectrosonics.com. In the top menu, hover
the mouse over Support, and click on Wireless Support.
On the right-hand-side Wireless Support Menu, choose
Wireless Downloads. Choose your product (HMa), then
choose Firmware Updates.
Step 1:
Begin by downloading the USB Firmware Updater
Program.
Step 2:
Next, test the Updater by opening the icon: If the
driver opens automatically, proceed to Step 3.
WARNING: If you receive the following error, the
Updater is not installed on your system. Follow the
TROUBLESHOOTING steps to fix the error.
TROUBLESHOOTING:
If you
receive the
FTDI D2XX
error
shown
above,
download
and install
the driver
by clicking
on this link.
Then click here to download.
NOTE: This website, http://www.ftdichip.com/
Drivers/D2XX.htm, is not associated with
Lectrosonics.com. It is a third party site used
only for D2XX drivers currently available for
Lectrosonics’ devices’ upgrades.