User's Manual

DSQD Manual
LECTROSONICS, INC.
8
Navigating the Menus
All Setup Menu items are arranged in a vertical list on
the LCD. Press MENU/SEL to enter the menu, then
navigate with the UP and DOWN arrows to highlight the
desired setup item.
NOTE: To guarantee chosen parameters are
saved, exit a setup screen BEFORE powering
down DSQD.
Press MENU/
SEL to enter
the menu
Press the UP and DOWN arrows
to navigate and highlight the
desired menu item
Press MENU/SEL
to enter the setup
of the highlighted
item
Press BACK to return to the previous
screen and save selected settings
Press the UP and DOWN
arrows to navigate and highlight
the desired item or edit
selected field
Quick Access Menu
The quick access menu is a list of menu items grouped
together for DSQD quick start:
• RF Frequency • Sync Settings
• Frequency Scan • Compatibility Modes
• Group Tune
RF Setup Menu
RF Frequency
Allows manual selection of the operating frequency for
each channel.
NOTE: Display varies with compatibility mode
selection.
Frequency Scan
1. To begin, press MENU/SEL to start the scan.
NOTE: All four channels scan at the same time.
You can also select individual channels for
scanning by pressing the channel selector buttons.
2. Once the scan has completed, use UP and DOWN
arrows to navigate to ZOOM, then press MENU/
SEL.
3. Press one of the four channel selector buttons. The
word TUNING will flash on the screen to let you
know you are tuning. Press the UP and DOWN ar-
rows to tune the channel into the area of lowest RF
activity.
Press BACK to save
frequency to channel