User's Manual

Digital Receiver

Rio Rancho, NM

1. Begin by selecting a key type.

2. The DSQD will then display a warning to indicate

that there is NO KEY! Select CREATE KEY to

generate a new key.

NOTE: When Universal Key type is selected, there

is no prompt to create key. See Encryption Key

Management for more information.

3. A message will pop up on the screen warning the

user that all transmitters will need a new key. Select

OK. The creation of a new key is conﬁrmed.

4. Sync new key with transmitter (see Sync Key). The

transmitted audio will then be encrypted with the

new key.

Sync Settings

Allows sending or retrieving setup data, including

frequency, name and talkback settings, via the IR port.

There are two ways to initiate a sync.

Sync options: Choose to send frequency, send all

settings, retrieve (get) frequency or retrieve (get) all

settings from a transmitter. Use the UP and DOWN

arrows to select a function and MENU/SEL to initi-

ate sync.

Choose Transmitter: Choose one of four Rx chan-

nels by using the Channel Selector Buttons, 1, 2,

3 or 4. Hold and press the Channel Selector Button

to initiate sync.

NOTE: You must position the transmitter’s IR port

directly in front of the DSQD IR port, as closely

as possible, to guarantee a successful sync. A

message will appear on the DSQD if the sync was

successful or failed.

Sync Key

Send or retrieve (get) encryption keys.

Tools and Settings Menu

RX On/Off

Use UP and DOWN arrows to toggle power on and off

(to conserve power consumption).

TX Battery Type

Set battery type for each channel. Use MENU/SEL to

set and move cursor and the UP and DOWN arrows to

change values.