Owner manual

DNT Digital Processor
LECTROSONICS, INC.
14
Network and PC
Connections
The DNT processors send and receive audio via the
Dante network, and to and from local devices con-
nected directly to them.
Gigabit Ethernet switch
Using Switched and Redundant Modes
NOTE: See page 8 for instructions on
selecting the mode using Dante Controller
software.
Set processors to the Switched mode for setup.
In the Switched mode, the Primary and Sec-
ondary ports can be connected in any combi-
nation since there is an ethernet switch in the
hardware.
In the Redundant mode, the Primary ports on
all processors must be connected to the first net-
work and the Secondary ports on all processors
must be connected to the second network.
After all connections and settings are completed
and the system is passing audio through the net-
work, connect the second network and set the
processors to the Redundant mode.
DNT0212
DNT16i
Server/Router
Gigabit Ethernet switch
Local audio sources
Primary Network
Secondary Network
Analog audio outputs
to recorders and
sound systems Analog audio from
external source such
as voice evacuation
system
OR
Ethernet USB
(front panel)
Gigabit Ethernet switch
(optional)
PC connections
can be made via
the Ethernet ports
or the USB ports