User's Manual

DCHT, DCHT/E01
LECTROSONICS, INC.
4
Features and Functions
Battery
status LED
Status Ready LED
Menu navigation
Power
Return to
previous screen
Enter menu/Select item
Modulation
indicators*
Programmable
function switch
Audio
input
jack
Antenna
port
Bi-directional IR port
Whip Antennas
Because the transmitter tunes across such a
broad frequency range, it is best to use the ap-
propriate antenna for maximum operation. Two
antennas are included with the transmitter, and
are shipped from the factory pre-cut and fully
assembled. Each antenna covers three blocks.
Refer to the chart below to determine which an-
tenna matches the operating frequency you will
be using.
Frequency Cap
Block Range MHz Color Antenna
470 470.100 - 495.600 Black AMM19
19 486.400 - 511.900 Black AMM19
20 512.000 - 537.500 Black AMM19
21 537.600 - 563.100 Red AMM22
22 563.200 - 588.700 Red AMM22
23 588.800 - 607.950 Red AMM22
USB Port
Optional Battery Eliminator
The transmitter can be powered by external DC using
the optional LTBATELIM power supply adapter. The
battery door is replaced by the adapter with a simple
procedure. The adapter provides a locking coaxial con-
nector and a variety of power cords and connectors are
available.