User's Manual

Digital Camera Hop Receiver
Rio Rancho, NM
7
LCD Main Window
520.000
Rx
DCHR
60
0
0
-20
-40
-60
Receiver
Name
RF Level
Audio Level
Diversity
Activity
Headphone
Volume
Mixer mode
Frequency
Battery life
indicator
RF level
The triangle graphic corresponds to the scale on the
left side of the display. The scale indicates the incom-
ing signal strength in microvolts, from 1 uV at the bot-
tom to 1,000 uV (1 millivolt) at the top.
NOTE: RF level will turn from white to green
when the signal is acquired. This is a redundant
indication of the blue RF Link LED.
Diversity activity
The two antenna icons will alternately light up depend-
ing on which one is receiving the stronger signal.
Battery life indicator
The battery life icon is an approximate indicator of the
remaining battery life. For the most accurate indication,
the user should select “Battery Type” in the menu and
select Alkaline or Lithium.
Audio level
This bar graph indicates the level of the audio entering
the transmitter. The “0” refers to the level reference, as
chosen in the transmitter, i.e. either +4 dBu or -10 dBV.
Mixer mode
Indicates which mixer mode has been selected for the
receiver. (See page 10.)
Navigating the Menus
From the Main Window, press MENU/SEL to enter the
menu, then navigate with the UP and DOWN arrows to
highlight the desired setup item. Press MENU/SEL to
enter the setup screen for that item. Refer to the menu
map on the following page.
Press BACK to
return to the
previous screen
Press MENU/
SEL to
enter the
setup of the
highlighted
item
Press the UP and DOWN
arrows to navigate and
highlight the desired
menu item
Press MENU/
SEL to enter
the menu
520.000
Rx
DCHR
60
0
0
-20
-40
-60
520.000
Rx
DCHR
60
0
0
-20
-40
-60